How to Find Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. Having such a piping usually means that you have a high-pressure gas system for your home. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.
If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. If you use a plan to find the valves then you are sure that you are able to easily know where to start.